- Model:
-
PICOGLF40W48V240VS
Details: Aims Power PICOGLF40W48V240VS 4000 Watt Pure Sine Inverter Charger
The AIMS 4000 Watt, 48 Volt DC to 120/240 Volt AC pure sine wave inverter charger with built-in transfer switch and battery charger is your solution for backup or off grid power solutions. This inverter is split-phase and will output 110/120 or 220/230/240Vac, and operates at 50 or 60Hz via the SW4 dipswitch on the DC side of the product. This means that this inverter works internationally and is operable with nearly any electrical system on the planet.The 110/120/220/240 split phase inverter is capable of producing 2 legs of 110v, making this inverter perfect for home and shop applications with a 220 panel in place.
Features
- 4000 watt low frequency inverter
- 12000 watt surge for 20 seconds 300% surge capability
- 48 Volt DC
- 120/240 VAC split phase output
- Battery priority selector
- Terminal block
- Marine coated and protected
- Multi stage smart charger 115 Amp
- Charges lithium LiFePO4, GEL, AGM and lead batteries.
- We recommend to check battery charging specifications for all batteries.
- Remote panel available
- Auto frequency
- 10msec typical transfer time
- Optional 25W power save mode
- 7 battery type settings for charger
- Automatic transfer switch
- Selectable charge setting based on battery type
- Adjustable charge current off -20%-100%
- Four stage smart charger
Specifications
- Continuous output power
- 4000 Watt
- Surge rating
- 12000 Watt (20 seconds)
- Output
- 110/120/220/240 VAC 50 or 60 Hz
- Output waveform
- pure sine/same as input (bypass mode)
- Nominal efficiency
- More than 88% (peak)
- Line mode efficiency
- More than 95%
- Output frequency
- 50Hz +/- 0.3Hz and 60Hz +/- 0.3Hz
- Typical transfer time
- 10ms (max)
- THD
- less than 10% DC
- Ambient operating temperature
- 14 degree Fahrenheit to 122 degree Fahrenheit (-10 Degree Celsius to 50 Degree Celsius)
- Nominal input voltage
- 48.0 VDC
- Minimum start voltage
- 44.0 VDC
- Low battery alarm
- 42 VDC-44.0 VDC
- Low battery trip
- 40 VDC-42 VDC
- High voltage alarm
- 64 VDC
- Low battery voltage restart
- 53.2 VDC
- Idle consumption
- 1.67 amps DC
- Power saver mode idle consumption
- less than .83 amps DC
- Output voltage
- depends on battery type
- Charger rate
- 40 A
- Over charge protection shutdown
- 62.8 V
Applications
- Public Buildings & Facilities
- Commercial & Industrial Buildings
- Government & Military Facilities
- Retail & Strip Malls
- Multifamily & Mixed-Use