Aims Power PWRINV10KW12V 10,000 Watt Modified Sine Power Inverter 12vDC to 120vAC
$1,264.00
- Model:
-
PWRINV10KW12VItem is normally in stock and ships out within 1-2 Business days (excluding transit time).If out of stock it can take up to 1-2 weeks (excluding transit time). Specific options may or may not increase shipping time. For any reason, if there is a delay in shipping time we will notify you. Feel free to contact us if you have any concerns.Request for Quote
Details: Aims Power PWRINV10KW12V 10,000 Watt Modified Sine Power Inverter 12vDC to 120vAC
This new 10000-watt 12-volt inverter model has all the capabilities of AIMS Power's 8000-watt 12-volt inverter but offers a higher wattage capacity for bigger power demands. Our 10000-Watt 12VDC to 120VAC Modified Sine Power Inverter can run multiple appliances at once.It also offers a reliable, powerful solution for operating a piece of equipment that demands a high-wattage capacity, such as an air conditioner or air compressor. These machines use what's called "locked rotor startup" or "locked rotor amperage." LRA generates a surge that only a very powerful inverter can handle.This AIMS Power DC to AC inverter can get the job done because it can handle 20000 watts of surge for 40 milliseconds. This inverter is perfect for off-grid home backup power or at job sites where higher power demands are common.
Features
- 10000W max continuous power
- Modified sine wave with Pulse Width Modulation technology (soft start)
- Volt meter on front panel to monitor your battery voltage
- Amp meter on front panel to monitor your current use (rate at which battery is drained)
- Over Temperature LED indicator
- Over Load LED indicator
- AC direct connect terminal block
- On/off switch
- Over Temperature protection
- Over Load protection
- Single cooling fan thermally controlled
- Internally fuse protected
- AC output short circuit protection
- Auto reset on most fault conditions
- Aluminum case for optimal cooling
- Pre-wired for remote on/off switch
- Pre-slotted mounting plate
- Instruction manual
- Free 1 year tech support
- UL maximum recommended per outlet 1500W
- This inverter requires 2 sets of 4/0 AWT cable if you are going to run at 10000 watts.
- 1 Year Warranty Parts and Labor
Specifications
- Continuous output power
- 10000 Watts
- Surge power capability (peak power)
- 20000 Watts
- Dc input / operating voltage
- 10 to 16 Volts
- Output voltage
- 120 Volts ac +/- 10%
- Output wave form
- modified sine wave with phase correction
- Output frequency
- 60 Hz +/- 1 Hz
- Battery low voltage alarm
- 10.5 +/- 0.5 Volts
- Battery low voltage shutdown
- 10.0 +/- 0.5 Volts
- No load current
- less than 1.8 DC amps
- Full load efficiency
- 90%
- 1/3 load efficiency
- 95%
- No load minimum operating temperature
- 30 degree F
- Full load maximum operating temperature
- 140 degree F (automatic shutdown)
- AC Output Socket Type
- quadruple Type 2 -3 prong
- High input voltage protection
- 15V-17V
- Low input voltage shutdown
- 10V Internal fuse protection
- Product size (L × W × H)
- 21 3/8 × 7 7/8 × 6 inches
- Weight
- unit 23.1 lbs
Applications
- Public Buildings & Facilities
- Commercial & Industrial Buildings
- Government & Military Facilities
- Retail & Strip Malls
- Multifamily & Mixed-Use
Downloads
Privacy Policy
Loading...