Alpha Communication SDACT-2 Serial Dialer and Digital Communicator
$1,439.95
$2,399.90
40% Off
- Model:
-
SDACT-2
Item normally ships out within 1-2 Weeks (excluding transit time).
If out of stock it can take up to 3-4 weeks (excluding transit time). Specific options may or may not increase shipping time. For any reason, if there is a delay in shipping time we will notify you. Feel free to contact us if you have any concerns.
Request for Quote
Details: Alpha Communication SDACT-2 Serial Dialer and Digital Communicator
The Alpha Communications / Keltron SDACT-2 is a unique solution that interfaces with emergency-call, access control, building management and other systems to enable an appropriate and instantaneous response from personnel at a central or remote monitoring location. The SDACT-2 provides a bridge to an on- or off-site central station-style digital receiver through the dial-up public switched telephone network (PSTN).The SDACT-2 accepts pre-defined ASCIII RS232 data strings and converts to SIA, a standard, digital receiver-compatible, alarm reporting format.
Features
- RS232 Port enables accurate monitoring of event type and location identification
- Test code call-in cycles are programmable. A manual test button is also included
- Transmits signals in industry standard SIA format
- Works with a variety of alarm notification equipment
- Zones 1-4 supervised EOL, suitable for fault-contact monitoring
- Zones 5-7 are available for loss of AC and battery fail indications, which are also reported using standard SIA event codes
- Local LEDs and audible devices clearly indicate Serial Dialer status
Specifications
- Phone Lines
- 2 RJ45 receptacles. Line seizure via RJ31x jack (by others)
- Hardwired Zone Inputs
- 7 (4-EOL resistor supervised). EOL resistor value 10K Ohms.
- Audible Device
- rated at 92DB
- Ringer Equivalence
- .1
- FCC Reg.US
- KELAL00BSDACT-2
- User Controls
- Jumper (8 total) and Pushbuttons: Reset, Manual Test, Silence, Program.
- Power Requirements
- Power Input - regulated or unregulated, filtered 20.4 to 27.5VDC
- Power Draw
- 75mA Idle, 200mA all alarm or lamp test
- Programming and Monitoring Port
- DB-9F RS-232
Applications
- Public Buildings & Facilities
- Commercial & Industrial Buildings
- Government & Military Facilities
- Retail & Strip Malls
- Multifamily & Mixed-Use