Command Access MLRK1-MRK Motorized Latch Retraction Kit For Design Hardware 1000 Exit Device
$555.59
$631.35
12% Off
- Model:
-
MLRK1-MRK
Item normally ships out within 1-2 Weeks (excluding transit time).
If out of stock it can take up to 3-4 weeks (excluding transit time). Specific options may or may not increase shipping time. For any reason, if there is a delay in shipping time we will notify you. Feel free to contact us if you have any concerns.
Request for Quote
Details: Command Access MLRK1-MRK Motorized Latch Retraction Kit For Design Hardware 1000 Exit Device
The new MLRK1-MRK/DH is a practical and cost-effective way to convert a mechanical Marks M9900 & M8800 36" series device to an electrified latch pullback device. The retrofit kit will maintain all UL listings on the device and for peace of mind is backed by CAT's 3-year no hassle warranty. The new unit easily hooks underneath the pushpad onto the back activating bracket and is secured with (2) screws, in a matter of minutes. The only hole you'll need to drill is for the wire raceway. PTS allows for a smooth post-installation adjustment of the latch/latches. An optional built-in REX switch is available on all units! Last but not least, the new MLRK1-MRK/DH's features an updated MM4S module with 2 different energy consumption settings from energy conscious to high torque to get the tough jobs done
Features
- Next Generation MM4S Smart Module: On board diagnostics with audible feedback for adjustment and power issues.
- "PTS": 5 second electronic adjustment for easy post installation adjustment.
- Electric dogging rated for continuous duty - Auto re-engage if push pad is pulled from dogged position.
- Low Current Draw - Field switchable to "High Torque" mode.
- Up to 300' wire run with 2-18ga wire - Long wire runs provides installer with convenience of placing the Command locking hardware power supply in a centralized location; i.e. the same closet as the access control panel.
- Push-n-Go Pigtail + 8' cable with Quick Connect for MM4S module to easily connect to power supply lead.
- Optional Request-to-exit can be built-in.
- 3-year "no hassle" warranty.
Specifications
- Voltage range
- 24VDC +/- 10%
- System protection
- unit shutdown when voltage exceeds 28VDC
- Standard
- Average Current Peak
- High Torque
- Average Current Peak
- PTS adjustment
- approx. 1/4"
- Wire Run
- 300' with 18ga wire
Applications
- Public Buildings & Facilities
- Commercial & Industrial Buildings
- Government & Military Facilities
- Retail & Strip Malls
- Multifamily & Mixed-Use