- Model:
-
P4010ACLEDSCO-3
Details: Kidde P4010ACLEDSCO-3 120V AC Smoke/CO Alarm w/ 3-in-1 LED Strobe & 10-Year Sealed Battery Backup
The Kidde P4010ACLEDSCO-3 is an integrated 120V AC wire-in smoke and carbon monoxide (CO) alarm with 10-year sealed battery backup and LED strobe light that provides temporal patterns, visual and voice warnings. The model P4010ACLEDSCO-3 is equipped with a 177 candela strobe light, designed to notify the deaf and hard of hearing. The unique design measures only 2.3" in height, when mounted.
If smoke is detected, the P4010ACLEDSCO-3 will produce a steady flash warning (once per second) and sound 3 long beeps, followed by "Fire!", repeating. During a CO incident the strobe horn will sound four (4) short beeps, followed by "Warning! Carbon Monoxide!", repeating every 5 seconds. The LED ring will flash red in conjunction with the audible beeps.
In an alarm condition, strobe flashes will synchronize with other interconnected P4010ACLEDS-2 and/or P4010ACLEDSCO-3 alarms.
The P4010ACLEDSCO-3 is UL Listed.
Features
- Integrated Photoelectric Smoke / CO Alarm and LED Strobe Light - A single unit can be installed, where previously a separate smoke / CO alarm and strobe light were needed. It requires only one electrical box, reducing labor costs and installation time. No relay required.
- Low Profile Bright 177 Candela Strobe Light - Light level proven effective in warning those with hearing loss. Attractive low profile design.
- Synchronized Flash Rates - Strobe flashes will automatically synchronize (flash at the same time) with other interconnected P4010ACLEDS-3 and/or P4010ACLEDSCO-3 alarms. Note: Will not synchronize during test mode
- 120V Interconnect with 10-year Sealed Lithium Battery Backup - Will interconnect with up to 24 other Kidde devices. Battery backup provides 10 years of continuous protection. Note: battery backup will only power the smoke/CO alarm.
- Voice Warning - Announces "Fire!" or "Carbon Monoxide!"
- Ambient Light Sensing - Establishes Day/Night cycle and delays chirping during the night until the next day cycle begins.
- Hush Feature - Temporarily silences nuisance alarms for up to 10 minutes (smoke must be present before Hush is activated).
- Test Feature - Simultaneously tests the unit's electronics and verifies alarm operation.
Specifications
- Power Source
- 120VAC (60 Hz, 53ma - 687ma max)
- Sensor
- Smoke:Photoelectric CO:Electrochemical
- Audio Alarm
- 85dB at 10ft
- Temperature Range
- 40F (4.4C) to 100F (37.8C)
- Humidity Range
- 10 to 95% relative humidity, non-condensing
- Size
- 5.9" in diameter x 1.91" depth
- Weight
- .6 lb
- Interconnects
- Up to 24 Kidde devices
Applications
- Public Buildings & Facilities
- Commercial & Industrial Buildings
- Retail & Strip Malls
- Multifamily & Mixed-Use