Klein Tools ET40 Digital AC/DC Voltage Tester 12 to 240V AC, 1.5 to 24V DC
$22.99
- Model:
-
ET40Item is normally in stock and ships out within 3-5 Business days (excluding transit time).If out of stock it can take up to 2-4 weeks (excluding transit time). Specific options may or may not increase shipping time. For any reason, if there is a delay in shipping time we will notify you. Feel free to contact us if you have any concerns.Request for Quote
Details: Klein Tools ET40 Digital AC/DC Voltage Tester 12 to 240V AC, 1.5 to 24V DC
Klein Tools ET40 is an Electronic AC/DC Voltage Tester. It features indicators for positive and negative DC polarity, and tests DC voltages as low as 1.5V. It tests AC voltages 12-240VAC. Excellent for checking, verifying or troubleshooting common residential electrical wiring in electrical outlets, light fixtures, doorbells and more. It operates on 2 × AAA batteries.
Features
- Voltage Tester for AC voltages from 12V to 240V AC at four useful levels aligned with commonly used residential voltages
- Tests DC voltages from 1.5V to greater than 17 to 24V at four useful levels aligned with commonly used DC voltages
- Bright LEDs illuminate to indicate the type and level of voltage detected
- Built to withstand a 9.8-Foot (3 m) drop
- Indicates polarity when measuring DC voltages
- Powers off automatically after approximately 2 minutes of non-use to conserve battery life
- CATIII 250V, Class 2, Double insulation
- Ingress protection IP41 dust and water resistant
- Built-in test lead holders on sides of tester
- Low battery indicator with easily accessible battery compartment
- Pocket clip secures tester to pocket for reliable everyday carrying
- Uses 2 × AAA batteries (included)
- Identifies and distinguishes between AC or DC voltage
- Read, understand, and follow all instructions, cautions and warnings attached to and/or packed with all test and measurement devices before each use.
- Before each use, verify tester operation by measuring a known voltage.
- Never use the tester on a circuit with voltages that exceed the category based rating of this tester.
- Always adhere to local and national safety codes. Use personal protective equipment to prevent shock and arc blast injury where hazardous live conductors are exposed.
- Usage of this tester in any way other than that specified by the manufacturer can impair safe operation, resulting in severe injury or death.
Specifications
- Application
- Measures AC/DC voltage
- Special Features
- DC Polarity Indicators for DC Positive, DC Negative, and Both Illuminated for AC. Tests Low DC Voltage to 1.5V. Built in Test Lead Holders on Sides of Tester
- Material
- Plastic Housing, PCB with Electronic Components
- Batteries
- 2 × AAA
- Drop Protection
- 9.8' (3 m)
- Display
- Analog LED
- Control Type
- ON/Off Switch for Power ON/OFF
- Voltage
- AC Level Indicators: 12V, 24V, 120V, 240V and DC Indicators:1.5V, 9V, 12V, >17-24V
- Frequency
- 50/60 Hz
- Ingress Protection
- IP41
- Pollution Degree
- 2
- Tests Continuity
- No
- Accuracy
- Approximately 70 to 100% of Indicated Voltage, Except for 2V DC (84 to 100%) and >17V DC (94 to 100% of 17V)
- Integral Lead Storage
- Yes
- Interchangeable Leads
- No
- Lead Length
- 9" (22.9 cm)
- Standard
- CATIII 250V, CE
- Case Included
- No
- Included
- Tester, User Manual, Batteries
Applications
- Public Buildings & Facilities
- Commercial & Industrial Buildings
- Government & Military Facilities
- Retail & Strip Malls
- Multifamily & Mixed-Use
Privacy Policy
Loading...