MS Sedco DH100-CT Safepath Sliding Door Combo Motion & Presence Sensor
$373.00
- Model:
-
DH100-CTItem is normally in stock and ships out within 2-3 Business days (excluding transit time).If out of stock it can take up to 2-4 weeks (excluding transit time). Specific options may or may not increase shipping time. For any reason, if there is a delay in shipping time we will notify you. Feel free to contact us if you have any concerns.Request for Quote
Details: MS Sedco DH100-CT Safepath Sliding Door Combo Motion & Presence Sensor
The DH100-CT is an all-active infrared 2-row motion, 3-row presence monitored combo sensor designed to provide both activation and safety protection in a single device for automatic sliding & folding doors. Additionally, the inner most row of presence detection will "look back" adding an added layer of safety protection within the threshold while the door is open.
The DH100-CT detection zone uses the most reliable active infrared technology available with individual detection points precisely reflected off the floor in an adjustable rectangular pattern to meet and exceed ANSI A156.10 guidelines.
Features
- Floor Reflection Method Active Infrared Technology (FRM-AI)
- One Sensor Provides Complete Presence Detection
- Test Input provides sensor monitoring capabilities as required by the latest industry standard.
- Pattern depth and width are adjustable using mounting height, dip switches, detection area depth, and detection area width adjustments.
- Frequency can be changed to prevent interference from other sensors in close proximity.
- Self-Diagnostic means the sensor continuously monitors itself.
- Monitor Mode Switch ensures against false operation caused by snow, leaves, insects, etc.
- Programmable Presence Timer (2 sec., 30 sec., 60 sec., or infinity)
Specifications
- Detection Method
- Floor Reflection Method Active Infrared (FRM-AI)
- Max. Installation Height
- 9.84 ft. (3.0m)
- Sensitivity Adjustment
- Variable (via potentiometer)
- Detection Area Adjustment
- Pattern Depth (2 to 5 rows via dip switch setting) and Angle Adjustment Levers (Outer 2 Rows 10 degree in 3 steps; Inner 3 Rows 8 degree in 3 steps); Pattern Width via 2 Position Mechanical Mask Knobs (Outer 2 Rows = Narrow or Wide Inner 3 Rows = Single or Double Door)
- Detection Beams
- Up to 48 Beams, (Inner 2 Rows: 12 Beams × 2 Rows), (Outer Rows: 8 Beams × 3 Rows)
- Presence Detection
- 1, 2 & 3 Inner Rows (Safety)
- Motion Detection
- 4 & 5 Outer rows (Approach)
- Power Requirements
- 12V to 24V AC or DC (plus/minus) 10 percent
- Power Consumption (Max.)
- AC12V-1.5VA, AC24V-2.0VA, DC12V-80mA, DC24V-50mA
- Output Contact
- Form C Relay, DC50V 0.1A (Resistor Load), Yellow Wire = Normally Open, Green Wire = Normally Closed, White Wire = Common; Relay is "driven" when power fails
- Output Holding Time
- Approx. 0.5 Seconds
- Presence Timer
- Outer 2 Rows (1 sec.), Inner 3 Rows (2, 30, 60 sec. & infinity)
- Operation Indication
- Red LED = Detecting, Green LED = Standby, Orange LED= Detection row "ROW 1" is too close to the door
- Temperature Range
- -4 degree F to 140 degree F (-20 degree C to 60 degree C)
Applications
- Public Buildings & Facilities
- Commercial & Industrial Buildings
- Government & Military Facilities
- Retail & Strip Malls
- Multifamily & Mixed-Use
Downloads
Privacy Policy