MS Sedco 2WIRE MODULE 2 Wire Module
$129.00
- Model:
-
2WIRE MODULEItem is normally in stock and ships out within 2-3 Business days (excluding transit time).If out of stock it can take up to 2-4 weeks (excluding transit time). Specific options may or may not increase shipping time. For any reason, if there is a delay in shipping time we will notify you. Feel free to contact us if you have any concerns.Request for Quote
Details: MS Sedco 2WIRE MODULE 2 Wire Module
The 2-WIRE Module enables the use of a powered actuator switch in place of a mechanical actuator switch, without the need for additional wires. Powered actuator switches, such as the 216 or NexGen hardwired series, typically require 4 wires to connect: 2 wires for power, and 2 wires for the output connection. Using the 2-WIRE module allows 4-wire configurations to work using only 2 wires, thus saving hours of expensive labor on the job site
Features
- ADA Compliant Operation
- 12 to 24V AC or DC Operation
- Form C Relay Output
- Heavy Duty 3 Amp Contact
Specifications
- Input Voltage
- 12V to 24V AC or DC, not polarity sensitive
- Input Current
- Approx. 100mA rate 18V AC
- Relay Contacts
- Form C rated at 3 amps rate 24V DC (resistive)
- Relay Operation Modes
- Normal or "fail-safe" (jumper selectable)
- Temperature
- -13 degree F to 140 degree F (-25 degree C to 60 degree C). Recommended For Interior Use
Applications
- Public Buildings & Facilities
- Commercial & Industrial Buildings
- Government & Military Facilities
- Retail & Strip Malls
- Multifamily & Mixed-Use
Downloads
Privacy Policy