NGP 9550 Edge Intumescent Sealing System
$23.33
$29.16
20% Off
As low as:
- Model:
-
9550-42268998
Item is normally shipped within 2-3 Weeks from manufacturer.
Specific options may or may not increase shipping time. For any reason, if there is a delay in shipping time we will notify you. Feel free to contact us if you have any concerns.
Request for Quote
Details: NGP 9550 Edge Intumescent Sealing System
Features
- NGP-Edge® Sealing System/Smoke and Draft Control Gasketing Category "G" and "H" Classified
- Self-Adhesive Intumescent
- NGP Intumescent materials are formulated to expand at 375°F to 400°F up to 8-10 times their original thickness; completely sealing the gap around and between doors during a fire
- Moisture resistant
- BHMA certified to ANSI/BHMA A156.22 performance tests for heat, cold, air infiltration and smoke infiltration
- Modified acrylic pressure sensitive adhesive protected by release liner
- Provides high initial adhesion and long term holding power for permanent mounting in exterior or interior locations
- Resistant to aging, weathering, UV radiation, water, detergent, alcohol and the influence of chemicals
- End use temperature range of adhesive, long term exposure -30°F up to 250°F
- Shelf life of adhesive prior to installation is one year when stored at 75°F and 50% relative humidity or less
- Rigid PVC base with flexible elastomeric fins
- Flame resistant
- Temperature range -60°F to 275°F
- Anti-microbial: treated with an anti-microbial additive to inhibit the growth of microorganisms
- REACH and RoHS compliant
- 20, 45, 60, 90 minute rated category B wood doors up to: single swing 4'0 × 9'0, perimeter application, pairs 8'0 × 9'0, perimeter/meeting edge
- 1/8" clearance required between doors and between door and frame
- 1-9/16" wide × 3/16" tall
- Available in 36", 48", 84", 96 and 108" lengths
- Gray
Options
Standards
- CERTIFIED by UL to CAN/ULC-S104 and ANSI/UL10B, complies with NFPA 80 and NFPA 252 for application to Hollow Metal fire doors rated up to 3 Hrs., and Wood fire doors rated up to 90 minutes.
- POSITIVE PRESSURE - CERTIFIED by UL to ANSI/UL10C, complies with IBC, NFPA 80 and NFPA 252 for application to Hollow Metal fire doors rated up to 3 Hrs., and Wood fire doors rated up to 90 minutes.
- AIR INFILTRATION TESTED to ASTM E283, Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors.
- SMOKE & DRAFT CONTROL GASKETING. Certified by UL to ANSI/UL10C and ANSI/UL1784 Category 'H'; complies with IBC and NFPA 105 for use on 'S' labeled Positive Pressure Hollow Metal fire doors rated up to 3 hours, and Wood fire doors rated up to 90 minutes.
- ANTI-MICROBIAL. Treated with an anti-microbial additive to prohibit the growth of microorganisms.
- ANSI/BHMA CERTIFIED. Certified Gasketing complies with American National Standard for Door Gasketing and Edge Sealing Systems ANSI/BHMA A156.22 and is listed in the BHMA Certified Products Directory.
Downloads
| Post-Consumer Recycled % | Pre-Consumer Recycled % | |
|---|---|---|
| Aluminum Thresholds, Rain Drip Guards | 18% | 49% |
| Architectural Bronze Thresholds, Rain Drip Guards | 70% | 25% |
| Stainless Steel Thresholds, Rain Drip Guards | 25% | 3% |
| Rubber Ramps | 0% | 0% |
| Gasketing with Aluminum Retainers | 13% | 37% |
| Gasketing with Bronze Retainers | 52% | 19% |
| Gasketing with Stainless Steel Retainers | 19% | 2% |
| Self-Adhesive Gasketing | 0% | 0% |
| Finger Guard 2248 | 13% | 37% |
| Finger Guard 2252 | 0% | 0% |
| Metal Edge/Astragal sets (Steel) | 25% | 3% |
| Lite Kits & Louvers (Steel) | 15% | 5% |
| Aluminum Lite Kits & Louvers | 18% | 49% |
| Stainless Steel Lite Kits | 25% | 3% |
| Continuous Geared Aluminum Hinges | 18% | 49% |
| Stainless Steel Continuous Hinges | 25% | 3% |
Privacy Policy
Loading...