Pemko TYPE11 Center Hung Floor Closer Threshold Assembly w/o Mitered Ends
$195.94
As low as:
- Model:
-
TYPE 11
Order $500 worth of Pemko Products and get 30% OFF!
Item normally ships out within 2-4 Weeks (excluding transit time).Specific options may or may not increase shipping time. For any reason, if there is a delay in shipping time we will notify you. Feel free to contact us if you have any concerns.
Request for Quote - TYPE OF ASSEMBLY: Type 11 or Type 14 for center hung, Type 13 or 15 for offset hung.
- CLOSER TO BE USED: Manufacturer and model number.
- NET LENGTH: Jamb-to-Jamb. Assembly Type 11, 13 and 14 are cut with center hung section 1/2" over net length up to 48" and 1" over net length over 48" to allow for fitting on the job. Please be specify "net length", if required. Assembly Type 15 is cut net length because of factory-cut miters.
- HANDING: For single doors, specify right or left hand. For pairs of doors, handing is not required.
- SPECIAL FINISHES: Examples include polished, oxidized and oil rubbed, Satin Buff, and PemKote.
- SPECIAL FASTENERS: (For center section only) Example include: MS and ES, FHLS25 and SS/MS&ES.
- SPECIAL FABRICATION INSTRUCTIONS - Notching, full miters, etc. Assembly Type 11 is supplied without mitered ends and assembly Type 13, 14 and 15 are supplied with both ends mitered. Also, when stop strips (shown on page 21), specify door thickness and pivot offset so that the threshold assembly width and pivot dimension can be determined.
- Barrier-Free
- Fire Rated - UL10C - Positive Pressure
Details: Pemko TYPE11 Center Hung Floor Closer Threshold Assembly w/o Mitered Ends
Floor Closer Threshold/Cover Plate Assemblies
Floor Closer Covers are thresholds used to cover floor closers. They must be properly fabricated to allow for the proper operation of the floor closer. No merchandise made for special order will be accepted for return or credit. When ordering, please provide the following information.
Size for Threshold Table
| Type | Size | Threshold | Material |
|---|---|---|---|
| 11 | 1/2 × 7 | 176A | Aluminum |
| 11 | 1/2 × 7 | 176B | Brass(Bronze) |
| 11 | 1/2 × 7 | 176D | Dark Bronze Anodized Aluminum |
| 11 | 1/4 × 7 | 276A | Aluminum |
| 11 | 1/4 × 7 | 276B | Brass(Bronze) |
| 11 | 1/4 × 7 | 276D | Dark Bronze Anodized Aluminum |
| 11 | 1/2 × 8 | 2548A | Aluminum |
| 11 | 1/2 × 8 | 254X4B | Brass(Bronze) |
| 11 | 1/2 × 8 | 2548D | Dark Bronze Anodized Aluminum |
| 11 | 1/4 × 8 | 2748A | Aluminum |
| 11 | 1/4 × 8 | 274X4B | Brass(Bronze) |
| 11 | 1/4 × 8 | 2748D | Dark Bronze Anodized Aluminum |
| 11 | 1/4 × 9 | 2749A | Aluminum |
| 11 | 1/4 × 9 | 2749D | Dark Bronze Anodized Aluminum |
| 11 | 1/4 × 10 | 2750A | Aluminum |
| 11 | 1/4 × 10 | 2750D | Dark Bronze Anodized Aluminum |
| 11 | 1/2 × 8-3/4 | 193Ax2/195A | Aluminum |
| 11 | 1/2 × 8-3/4 | 193Bx2/195B | Brass(Bronze) |
| 11 | 1/2 × 8-3/4 | 193Dx2/195D | Dark Bronze Anodized Aluminum |
| 11 | 1/2 × 9 | 2549A | Aluminum |
| 11 | 1/2 × 9 | 2549D | Dark Bronze Anodized Aluminum |
| 11 | 1/2 × 10 | 2550A | Aluminum |
| 11 | 1/2 × 10 | 2550D | Dark Bronze Anodized Aluminum |
Ratings
Documentation
Privacy Policy
Loading...