• GSA:Contract GS-07F-0249Y
  • Cage:Code 40786
  • DUNS:96-623-6536
  • UEI:Z445CMWLCNR6

Pemko TYPE15 Offset Floor Closer Threshold Assembly w/ Both Ends Mitered

Pemko
$394.40
Model:
TYPE 15

Order $500 worth of Pemko Products and get 30% OFF!

Item normally ships out within 2-4 Weeks (excluding transit time).
Specific options may or may not increase shipping time. For any reason, if there is a delay in shipping time we will notify you. Feel free to contact us if you have any concerns.
printer Print
Email to a Friend
Request for Quote

Email us your RFQ sales@americanwholesaleoutlet.com
or call us for pricing 215-279-8511
or send us a request using the form below and we will respond to you by email.

Details: Pemko TYPE15 Offset Floor Closer Threshold Assembly w/ Both Ends Mitered

Floor Closer Threshold/Cover Plate Assemblies

Floor Closer Covers are thresholds used to cover floor closers. They must be properly fabricated to allow for the proper operation of the floor closer. No merchandise made for special order will be accepted for return or credit. When ordering, please provide the following information.

  • TYPE OF ASSEMBLY: Type 11 or Type 14 for center hung, Type 13 or 15 for offset hung.
  • CLOSER TO BE USED: Manufacturer and model number.
  • NET LENGTH: Jamb-to-Jamb. Assembly Type 11, 13 and 14 are cut with center hung section 1/2" over net length up to 48" and 1" over net length over 48" to allow for fitting on the job. Please be specify "net length", if required. Assembly Type 15 is cut net length because of factory-cut miters.
  • HANDING: For single doors, specify right or left hand. For pairs of doors, handing is not required.
  • SPECIAL FINISHES: Examples include polished, oxidized and oil rubbed, Satin Buff, and PemKote.
  • SPECIAL FASTENERS: (For center section only) Example include: MS and ES, FHLS25 and SS/MS&ES.
  • SPECIAL FABRICATION INSTRUCTIONS - Notching, full miters, etc. Assembly Type 11 is supplied without mitered ends and assembly Type 13, 14 and 15 are supplied with both ends mitered. Also, when stop strips (shown on page 21), specify door thickness and pivot offset so that the threshold assembly width and pivot dimension can be determined.

Size for Threshold Table

TypeSizeThresholdMaterial
15 1/2 × 7 × 4 176A × 170A Aluminum
15 1/2 × 7 × 4 176B × 170B Brass (Bronze)
15 1/2 × 7 × 4 176D × 170D Dark Bronze Anodized Aluminum
15 1/4 × 7 × 4 276A × 270A Aluminum
15 1/4 × 7 × 4 276B × 270B Brass (Bronze)
15 1/4 × 7 × 4 276D × 270D Dark Bronze Anodized Aluminum
15 1/2 × 7 × 5 176A × 171A Aluminum
15 1/2 × 7 × 5 176B × 171B Brass (Bronze)
15 1/2 × 7 × 5 176D × 171D Dark Bronze Anodized Aluminum
15 1/4 × 7 × 5 276A × 271A Aluminum
15 1/4 × 7 × 5 276B × 271B Brass (Bronze)
15 1/4 × 7 × 5 276D × 271D Dark Bronze Anodized Aluminum
15 1/2 × 7 × 6 176B × 172B Brass (Bronze)
15 1/2 × 8 × 4 2548A × 170A Aluminum
15 1/2 × 8 × 4 254X4B × 170B Brass (Bronze)
15 1/2 × 8 × 4 2548D × 170D Dark Bronze Anodized Aluminum
15 1/2 × 8 × 5 2548A × 171A Aluminum
15 1/2 × 8 × 5 254X4B × 171B Brass (Bronze)
15 1/2 × 8 × 5 2548D × 171D Dark Bronze Anodized Aluminum
15 1/2 × 8 × 6 2548A × 172A Aluminum
15 1/4 × 8 × 4 2748A × 270A Aluminum
15 1/4 × 8 × 4 274X4B × 270B Brass (Bronze)
15 1/4 × 8 × 4 2748D × 270D Dark Bronze Anodized Aluminum
15 1/4 × 8 × 5 2748A × 271A Aluminum
15 1/4 × 8 × 5 274X4B × 271B Brass (Bronze)
15 1/4 × 8 × 5 2748D × 271D Dark Bronze Anodized Aluminum

Ratings

  • Barrier-Free
  • Fire Rated - UL10C - Positive Pressure

Catalog (PDF)

warranty Pemko Warranty
Loading...