Precision 300 Series Crossbar Mortise Exit Device - Handed
$2,131.50
$4,263.01
50% Off
As low as:
- Model:
-
300-42302353
-
Cylinder Not Included
Item normally ships out within 2-4 Weeks (excluding transit time).
Specific options may or may not increase shipping time. For any reason, if there is a delay in shipping time we will notify you. Feel free to contact us if you have any concerns.
Request for Quote
Details: Precision 300 Series Crossbar Mortise Exit Device - Handed
Olympian 300 Series - Handed
Olympian FL300 Fire Exit Series - Handed
Features
- Doors
- For all types of single and double door applications. Available for 1-3/4" to 2-1/4" thick, up to 4'-0" wide opening. For thicker doors, consult factory. Furnished standard for 1-3/4" thick, 3'-0" wide opening.
- Device
- Covers ANSI A115.1 (Type 86) Mortise Lock preparation.
- Covers
- Lock Stile and Hinge Stile Assembly, Cold drawn Bronze, Brass, Stainless Steel.
- Chassis
- Lock Stile and Hinge Stile Assembly, Investment Cast Steel, Zinc Dichromated.
- Arms
- Forged Brass or Bronze.
- Crossbar
- 1 Bronze, Brass or Stainless Steel tubing furnished standard for a 3'-0" Door. For wider doors, specify door width. Knurled and Reinforced crossbars are available.
- Dogging
- Hex Key dogging standard for Panic Hardware. NOT available on Fire Exit Hardware.
- Handed
- Specify hand when ordering as RHRB or LHRB. Standard packaging is RHRB.
- UL Listed
- Panic and Fire Exit Hardware. For FIRE EXIT HARDWARE Ratings see page 15. Conforms to UL10C and UBC 7-2.
- ANSI/BHMA
- Devices are BHMA certified for ANSI 156.3, Grade 1.
- Finishes
- 605, 606, 612, 613, 625, 630
- Cylinders
- Mortise type, not furnished standard. For cylinder details see page 13.
- Stile Width
- See Stile Information on page 14.
- Crossbar Height
- 34-5/8" to centerline from finish floor standard. May be varied as situation dictates, consult factory.
- Mortise Lock
- Handed Fits doors machined per ANSI A115.1 for Federal Lock Type 86.
- Backset
- 2-3/4"
- Case
- Wrought Steel, Zinc Dichromate finish.
- Lock Front Plate
- 8" × 1-1/4" Bronze, Brass or Stainless Steel, pivots for beveled or square edged doors.
- Latchbolt
- Stainless Steel, Deadlocking, 3/4" throw, anti-friction.
- Guardbolt
- Stainless Steel, sliding type.
- Finishes - LOCK FRONT PLATE and STRIKE
- 605, 606, 612, 613, 625, 630
- Strikes
- No. S982 handed curved lip strike standard. For optional strikes see page 10.
- Lock No
- M303 for 01, 02 and 03 functions. M308 for 05, 05A, 08 and 08A functions.