Sargent 8600 Series Low Profile Center & Top Latch Concealed Vertical Rod Exit Device w/ ET Trim & Standard, Coastal, Studio Lever
$2,684.88
$4,474.80
40% Off
As low as:
- Model:
-
8600-42292005
-
Item normally ships out within 4-6 Weeks (excluding transit time).
Specific options may or may not increase shipping time. For any reason, if there is a delay in shipping time we will notify you. Feel free to contact us if you have any concerns.
Request for Quote
Details: Sargent 8600 Series Low Profile Center & Top Latch Concealed Vertical Rod Exit Device w/ ET Trim & Standard, Coastal, Studio Lever
Features
- The security of a stainless steel center bolt, two concealed top bolts and a low profile device for pairs of doors without bottom rod issues
- Devices are ANSI/BHMA A156.3 - Grade 2
- UL10C (Fire) and UL305 (Panic) listed
- 1-1/2" total projection from face of door
- Center and top latching
- No visible active chassis
- Center latchbolt adjustable for up to 3/8" (9mm) door gap
- Both doors are active. Either door can be opened or closed without affecting the other door. Open back strikes are not required
- Top case latchbolt projection adjustable through top case
- Tripping potential removed - no bottom strike
- All functions determined by outside trim (ET Trim only)
- Concealed rods for security and aesthetics
Specifications
- Door Type
- Factory prepped metal doors for LP & LR devices
- Door Thickness
- 1-3/4" (44mm) doors only with 2-3/4" (70mm) backset
- Stile
- 4-1/2" (114mm) minimum stile
- Rail sizes as determined door width
- L Rail for 36" door width no cutting required, M Rail for 42" to 44" door width no cutting required, N Rail - 46" to 48" door width no cutting required
- Strike
- 650 Top Strike (Panic and Fire Rated) [LR & LP], 650 Top Strike & C7710 Mortise Strike (Panic and Fire Rated) [LS]
- Dogging Feature
- Hex key dogging standard on non fired rated devices; specify 16- for cylinder dogging (
- Mounting Fasteners
- Supplied standard with machine screws
- Top & Center Bolts
- Stainless steel
- Device Centerline from Finished Floor
- 41" (1041mm) for Standard Applications
- Door/Opening Height
- Must be specified, 120" (3048mm) Max Door Opening
- Center Case Dimensions
- 8-3/8" (213mm) × 2-5/8" (67mm)
- Projection
- Pushbar Neutral - 1-1/2" (38mm), Pushbar Depressed - 5/8" (15mm)
Applications
- Public Buildings & Facilities
- Commercial & Industrial Buildings
- Government & Military Facilities
- Retail & Strip Malls
- Multifamily & Mixed-Use