SECO-LARM LD Loop Detector
$61.25
- Model:
-
LD-42326251
Item is normally in stock and ships out within 2-3 Business days (excluding transit time).
If out of stock it can take up to 2-4 weeks (excluding transit time). Specific options may or may not increase shipping time. For any reason, if there is a delay in shipping time we will notify you. Feel free to contact us if you have any concerns.
Request for Quote
Details: SECO-LARM LD Loop Detector
The LD-1123-PAQ Loop Detector is designed to be used with gates or other vehicle detection systems. The unit connected to an input loop which is buried in the pavement. If a vehicle is over the input loop, the detector sends a signal to perform such actions as opening a gate, holding a gate open, or indicating that a vehicle is in a bay.
Features
- Single loop input
- 3 Adjustable sensitivity settings
- 2 Form "C" relay outputs
- 11-Pin connector
- ABS plastic housing
- Power-on automatic reset
- Automatic drift compensation for varying environmental conditions
- Auto fault detection
- Weather-resistant (IP54)
- Terminal block (LD-ACC-TB) included
- Also Available: Wire Harness (LD-ACC-WH)
Specifications
- Sensitivity
- 3 levels of sensitivity
- IP Rating
- Weather-resistant IP54
- Type
- Loop Detector
- Current Draw
- Standby - 40mA:12VDC / 40mA:24VDC, Active - 50mA:12VDC / 60mA:24VDC
- Loop induction range
- 80-300 Microhenry
- Operating Voltage
- 12-24 VAC/VDC
- Reaction time
- 100ms
- Vehicle detection mode
- Combines relays 1 and 2 to detect vehicle presence, with pulse on entry
- Presence output
- Temporary (triggers relay 1 as long as vehicle is in the loop, times out after 5 minutes)
- Pulse output
- Pulses relay 2 on entry
- Fault output
- Relay 2 is continually energized and the green LED stays on
- Pulse output time
- 200ms
- LEDs
- Red - Power indicator, Green - Status indicator (vehicle detected or fault)
- Input / Output protection
- Built-in surge and transient protection
- Case material
- Black ABS plastic
- Operating Humidity
- Up to 95 percent without condensation
- Operating Temperature
- -40 degree-149 degree F (-40 degree-65 degree C)
- Dimensions
- 2-15/16"x1-7/16"x3-5/16" (74x36x85 mm)
- Weight
- 7.2-oz (203g)
Applications
- Public Buildings & Facilities
- Commercial & Industrial Buildings
- Government & Military Facilities
- Retail & Strip Malls
- Multifamily & Mixed-Use