Super Lube 41140 Multi-Purpose Synthetic Grease 400lb. Drum
$5,362.22
$7,149.62
25% Off
- Model:
-
41140
Minimum combined Super Lube orders must be $5000 excluding shipping. Please email us your RFQ to provide the shipping cost.
This item ships via LTL (Less than truckload) freight.
Item is normally in stock and ships out within 2-3 Business days (excluding transit time).If out of stock it can take up to 2-4 weeks (excluding transit time). Specific options may or may not increase shipping time. For any reason, if there is a delay in shipping time we will notify you. Feel free to contact us if you have any concerns.Request for QuoteDetails: Super Lube 41140 Multi-Purpose Synthetic Grease 400lb. Drum
Super Lube® Multi-Purpose Synthetic Grease is Super Lube's flagship grease. A highly versatile compound, its formula combines synthetic base fluids with PTFE micro powders to provide premium protection against friction, wear, rust, and corrosion at temperatures ranging from -45° to +450° Fahrenheit. Super Lube® grease is compatible with most other lubricants, and is a USDA/NSF listed Food Grade NLGI-2 lubricant, rated H-1 for incidental food contact.
Contact us for a freight quote!
Super Lube® Synthetic Grease will not run, drip, evaporate, form deposits, melt, or separate. This grease can be used in a wide variety of applications, on everything from fitness equipment, lawn mowers, and sewing machines to ball bearings, chains, wheels, winches, pulleys, and food processors. For a complete list of applications, or if you have a question, CONTACT US.
Material Safety Data Sheets (MSDS) Super-Lube Certifications Super-Lube Technical Bulletins Super-Lube Applications TEST TEST METHOD SUPER LUBE® MULTI PURPOSE GREASE NLGI GRADE ASTM D217 2 NLGI CLASSIFICATION* ASTM D4950 GC-LB* COLOR Translucent White TEMPERATURE RANGE
-45°F to 450°F (-43°C to 232°C) continuous
-50°F to +500°F (-45°C to 260°C) intermittent
VISCOSITY (BASE OIL) cSt @ 100°C
SUS @ 40°C
ASTM D445
8
350
SPECIFIC GRAVITY ASTM D1298 .89 @ 60°F WATER, PPM ASTM D1744 35 ppm TAN ASTM D974 0.04 maximum DROPPING POINT ASTM D2265 >500°F (260°C) PENETRATION, worked (60 Strokes) ASTM D217 265-295 mm/10 FOUR BALL TEST ASTM D2596 LOAD WEAR INDEX 81.73 kg WELD POINT 400 kg FOUR BALL EP TEST Scar diameter ASTM D 2266 <.5 LOW TEMPERATURE TORQUE @ -54°C ASTM D1478 Starting 0.27 N-m (0.37 in-lbs) 10 Min Running 0.08 N-m (0.11 in-lbs) 1 Hr Running 0.006 N-m (0.09 in-lbs) SALT SPRAY TEST (100 hrs) ASTM B117 pass DIELECTRIC LOSS ASTM D924 1.2 X 1012 DIELECTRIC RESISTIVITY ASTM D1169 1.7 X 1014 DIELECTRIC CONSTANT ASTM D924 2.5 OIL SEPARATION ASTM D6184 <2% EVAPORATION LOSS 22 hours @ 212°F (100°C) ASTM D972 <1% OXIDATION STABILITY, 100 hrs ASTM D942 6.9 kPa TIMKEN OK LOAD ASTM 2509 40 lbs FLASH POINT ASTM D92 >428°F (220°C) FIRE POINT ASTM D92 >572°F (300°C) WHEEL BEARING LEAKAGE ASTM D1263 0.2 g WATER WASHOUT ASTM 1264 3.0% COPPER CORROSION 24 hrs @ 100°C ASTM D4048 and D130 1B, shiny ACID NUMBER ASTM D664 .5 mg KOH/g WARRANTY 24 MONTHS
Privacy Policy